OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-02665-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #21 SMP Thu Feb 1 08:49:48 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x00000000ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x00000000ffffffff] Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 516615 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Sorting __ex_table... Memory: 2054964K/2095104K available (5390K kernel code, 336K rwdata, 1472K rodata, 192K init, 848K bss, 40140K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,plic0,c000000: mapped 10 interrupts to 1/2 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0xee/0x28e with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=19 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-02665-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #21 SMP Thu Feb 1 08:49:48 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x00000000ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x00000000ffffffff] Initmem setup node 0 [mem 0x0000000080200000-0x00000000ffffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 516615 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Sorting __ex_table... Memory: 2054964K/2095104K available (5390K kernel code, 336K rwdata, 1472K rodata, 192K init, 848K bss, 40140K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,plic0,c000000: mapped 10 interrupts to 1/2 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0xee/0x28e with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=19 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 1, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 192K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Wed Feb 14 19:13:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder EXT4-fs (vdb): mounting ext2 file system using the ext4 subsystem EXT4-fs (vdb): mounted filesystem without journal. Opts: (null) + set -e + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/curl-7.58.0-2.fc28.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nodeps --nocheck Installing /var/tmp/curl-7.58.0-2.fc28.src.rpm warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root warning: user mockbuild does not exist - using root warning: group mockbuild does not exist - using root Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Ku8n0R + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf curl-7.58.0 + /usr/bin/tar -xof - + /usr/bin/xz -dc /rpmbuild/SOURCES/curl-7.58.0.tar.xz + STATUS=0 + '[' 0 -ne 0 ']' + cd curl-7.58.0 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #101 (0101-curl-7.32.0-multilib.patch):' Patch #101 (0101-curl-7.32.0-multilib.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file curl-config.in patching file docs/curl-config.1 patching file libcurl.pc.in + echo 'Patch #102 (0102-curl-7.36.0-debug.patch):' Patch #102 (0102-curl-7.36.0-debug.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file configure patching file m4/curl-compilers.m4 + echo 'Patch #104 (0104-curl-7.19.7-localhost6.patch):' Patch #104 (0104-curl-7.19.7-localhost6.patch): + /usr/bin/patch --no-backup-if-mismatch -p1 --fuzz=0 patching file tests/data/test1083 patching file tests/data/test241 + printf '1112\n1801\n' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zOjdI8 + umask 022 + cd /rpmbuild/BUILD + cd curl-7.58.0 + mkdir build-full build-minimal + export 'common_configure_opts= --cache-file=../config.cache --disable-static --enable-symbol-hiding --enable-ipv6 --enable-threaded-resolver --with-gssapi --with-nghttp2 --with-ssl --with-ca-bundle=/etc/pki/tls/certs/ca-bundle.crt' + common_configure_opts=' --cache-file=../config.cache --disable-static --enable-symbol-hiding --enable-ipv6 --enable-threaded-resolver --with-gssapi --with-nghttp2 --with-ssl --with-ca-bundle=/etc/pki/tls/certs/ca-bundle.crt' + cd build-minimal + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro ' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ../configure ++ find .. -name config.guess -o -name config.sub + for i in $(find $(dirname ../configure) -name config.guess -o -name config.sub) ++ basename ../config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ../config.guess ++ basename ../config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ../config.guess '/usr/lib/rpm/redhat/config.guess' -> '../config.guess' + for i in $(find $(dirname ../configure) -name config.guess -o -name config.sub) ++ basename ../config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ../config.sub ++ basename ../config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ../config.sub '/usr/lib/rpm/redhat/config.sub' -> '../config.sub' + '[' 0 = 1 ']' + ../configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --cache-file=../config.cache --disable-static --enable-symbol-hiding --enable-ipv6 --enable-threaded-resolver --with-gssapi --with-nghttp2 --with-ssl --with-ca-bundle=/etc/pki/tls/certs/ca-bundle.crt --disable-ldap --disable-ldaps --disable-manual --without-libidn2 --without-libmetalink --without-libpsl --without-libssh configure: creating cache ../config.cache checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking for path separator... : checking for sed... /usr/bin/sed checking for grep... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for riscv64-redhat-linux-gnu-ar... no checking for ar... /usr/bin/ar checking for a BSD-compatible install... /usr/bin/install -c checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for a sed that does not truncate output... (cached) /usr/bin/sed checking whether to build with code coverage support... no checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking curl version... 7.58.0 checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defined... no checking if _THREAD_SAFE is actually needed... no checking if _THREAD_SAFE is onwards defined... no checking if _REENTRANT is already defined... no checking if _REENTRANT is actually needed... no checking if _REENTRANT is onwards defined... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for riscv64-redhat-linux-gnu-ar... /usr/bin/ar checking for archiver @FILE support... @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to build shared libraries with -version-info... yes checking whether to build shared libraries with -no-undefined... no checking whether to build shared libraries with -mimpure-text... no checking whether to build shared libraries with PIC... yes checking whether to build static libraries with PIC... no checking whether to build shared libraries only... yes checking whether to build static libraries only... no checking for inline... inline checking if cpp -P is needed... yes checking if cpp -P works... yes checking if compiler is DEC/Compaq/HP C... no checking if compiler is HP-UX C... no checking if compiler is IBM C... no checking if compiler is Intel C... no checking if compiler is clang... no checking if compiler is GNU C... yes checking if compiler is LCC... no checking if compiler is SGI MIPSpro C... no checking if compiler is SGI MIPS C... no checking if compiler is SunPro C... no checking if compiler is Tiny C... no checking if compiler is Watcom C... no checking if compiler accepts some basic options... yes configure: compiler options added: -Werror-implicit-function-declaration checking if compiler accepts debug disabling options... yes configure: compiler options added: checking if compiler optimizer assumed setting might be used... yes checking if compiler accepts optimizer enabling options... yes configure: compiler options added: checking if compiler accepts strict warning options... yes configure: compiler options added: -Wno-system-headers checking if compiler halts on compilation errors... yes checking if compiler halts on negative sized arrays... yes checking if compiler halts on function prototype mismatch... yes checking if compiler supports hiding library internal symbols... yes checking for windows.h... no checking whether build target is a native Windows one... no checking whether build target supports WIN32 file API... no checking for good-to-use Mac CFLAGS... no checking to see if the compiler supports __builtin_available()... no checking whether to support http... yes checking whether to support ftp... yes checking whether to support file... yes checking whether to support ldap... no checking whether to support ldaps... no checking whether to support rtsp... yes checking whether to support proxies... yes checking whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to provide built-in manual... no checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... yes checking for windows.h... (cached) no checking for winsock.h... (cached) no checking for winsock2.h... (cached) no checking for connect in libraries... yes checking whether time.h and sys/time.h may both be included... yes checking for sys/types.h... (cached) yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking time.h usability... yes checking time.h presence... yes checking for time.h... yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for riscv64-redhat-linux-gnu-pkg-config... /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for zlib options with pkg-config... found checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes configure: found both libz and libz.h header checking for BrotliDecoderDecompress in -lbrotlidec... no checking brotli/decode.h usability... no checking brotli/decode.h presence... no checking for brotli/decode.h... no checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... yes checking gss.h usability... no checking gss.h presence... no checking for gss.h... no checking gssapi/gssapi.h usability... no checking gssapi/gssapi.h presence... no checking for gssapi/gssapi.h... no checking for gssapi/gssapi_generic.h... no checking for gssapi/gssapi_krb5.h... no checking gssapi.h usability... no checking gssapi.h presence... no checking for gssapi.h... no configure: WARNING: disabling GSS-API support since no header files were found checking whether to enable Windows native SSL/TLS (Windows native builds only)... no checking whether to enable Apple OS native SSL/TLS... no checking for riscv64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for openssl options with pkg-config... no checking for HMAC_Update in -lcrypto... no checking for HMAC_Init_ex in -lcrypto... no checking OpenSSL linking with -ldl... no checking OpenSSL linking with -ldl and -lpthread... no checking for ssl_version in -laxtls... no configure: WARNING: SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more. configure: WARNING: Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls, --with-winssl, or --with-darwinssl to address this. checking default CA cert bundle/path... /etc/pki/tls/certs/ca-bundle.crt checking whether to use builtin CA store of SSL library... no checking for RTMP_Init in -lrtmp... no checking whether versioned symbols are wanted... no checking whether to enable Windows native IDN (Windows native builds only)... no checking whether to build with libidn2... no checking for riscv64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for libnghttp2 options with pkg-config... no checking for ANSI C header files... (cached) yes checking for malloc.h... yes checking for memory.h... no checking for sys/types.h... (cached) yes checking for sys/time.h... (cached) yes checking for sys/select.h... yes checking for sys/socket.h... yes checking for sys/ioctl.h... yes checking for sys/uio.h... yes checking for assert.h... yes checking for unistd.h... (cached) yes checking for stdlib.h... (cached) yes checking for arpa/inet.h... yes checking for net/if.h... yes checking for netinet/in.h... yes checking for netinet/in6.h... no checking for sys/un.h... yes checking for linux/tcp.h... yes checking for netinet/tcp.h... yes checking for netdb.h... yes checking for sys/sockio.h... no checking for sys/stat.h... (cached) yes checking for sys/param.h... yes checking for termios.h... yes checking for termio.h... yes checking for sgtty.h... yes checking for fcntl.h... yes checking for alloca.h... yes checking for time.h... (cached) yes checking for io.h... no checking for pwd.h... yes checking for utime.h... yes checking for sys/utime.h... no checking for sys/poll.h... yes checking for poll.h... yes checking for socket.h... no checking for sys/resource.h... yes checking for libgen.h... yes checking for locale.h... yes checking for errno.h... yes checking for stdbool.h... yes checking for arpa/tftp.h... yes checking for sys/filio.h... no checking for sys/wait.h... yes checking for setjmp.h... yes checking for an ANSI C-conforming const... yes checking for compiler support of C99 variadic macro style... yes checking for compiler support of old gcc variadic macro style... yes checking for size_t... yes checking whether time.h and sys/time.h may both be included... (cached) yes checking for sys/types.h... (cached) yes checking for sys/time.h... (cached) yes checking for time.h... (cached) yes checking for sys/socket.h... (cached) yes checking for struct timeval... yes checking run-time libs availability... fine checking size of size_t... 8 checking size of long... 8 checking size of int... 4 checking size of short... 2 checking size of time_t... 8 checking size of off_t... 8 checking size of curl_off_t... 8 checking for long long... yes checking if numberLL works... yes checking for ssize_t... yes checking for bool... yes checking for windows.h... (cached) no checking for winsock2.h... (cached) no checking for ws2tcpip.h... (cached) no checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for curl_socklen_t data type... socklen_trandom: crng init done checking size of curl_socklen_t... 4 checking for sys/types.h... (cached) yes checking for poll.h... (cached) yes checking for sys/poll.h... (cached) yes checking for in_addr_t... yes checking for struct sockaddr_storage... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking for sig_atomic_t... yes checking if sig_atomic_t is already defined as volatile... no checking return type of signal handlers... void checking for sys/select.h... (cached) yes checking for sys/socket.h... (cached) yes checking for select... yes checking types of args and return type for select... int,fd_set *,struct timeval *,int checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for recv... yes checking types of args and return type for recv... int,void *,size_t,int,ssize_t checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for send... yes checking types of args and return type for send... int,const void *,size_t,int,ssize_t checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for MSG_NOSIGNAL... yes checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes checking if alarm can be linked... yes checking if alarm is prototyped... yes checking if alarm is compilable... yes checking if alarm usage allowed... yes checking if alarm might be used... yes checking for sys/types.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... (cached) yes checking for sys/types.h... (cached) yes checking for libgen.h... (cached) yes checking if basename can be linked... yes checking if basename is prototyped... yes checking if basename is compilable... yes checking if basename usage allowed... yes checking if basename might be used... yes checking for sys/types.h... (cached) yes checking for socket.h... (cached) no checking if closesocket can be linked... no checking if closesocket might be used... no checking if CloseSocket can be linked... no checking if CloseSocket might be used... no checking if connect can be linked... yes checking if connect is prototyped... yes checking if connect is compilable... yes checking if connect usage allowed... yes checking if connect might be used... yes checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes checking for fcntl.h... (cached) yes checking if fcntl can be linked... yes checking if fcntl is prototyped... yes checking if fcntl is compilable... yes checking if fcntl usage allowed... yes checking if fcntl might be used... yes checking if fcntl O_NONBLOCK is compilable... yes checking if fcntl O_NONBLOCK usage allowed... yes checking if fcntl O_NONBLOCK might be used... yes checking for sys/types.h... (cached) yes checking for stdio.h... yes checking if fdopen can be linked... yes checking if fdopen is prototyped... yes checking if fdopen is compilable... yes checking if fdopen usage allowed... yes checking if fdopen might be used... yes checking for sys/types.h... (cached) yes checking for netdb.h... (cached) yes checking if freeaddrinfo can be linked... yes checking if freeaddrinfo is prototyped... yes checking if freeaddrinfo is compilable... yes checking if freeaddrinfo usage allowed... yes checking if freeaddrinfo might be used... yes checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for netinet/in.h... (cached) yes checking for ifaddrs.h... yes checking if freeifaddrs can be linked... yes checking if freeifaddrs is prototyped... yes checking if freeifaddrs is compilable... yes checking if freeifaddrs usage allowed... yes checking if freeifaddrs might be used... yes checking for sys/types.h... (cached) yes checking for sys/xattr.h... yes checking if fsetxattr can be linked... yes checking if fsetxattr is prototyped... yes checking if fsetxattr takes 5 args.... yes checking if fsetxattr is compilable... yes checking if fsetxattr usage allowed... yes checking if fsetxattr might be used... yes checking if ftruncate can be linked... yes checking if ftruncate is prototyped... yes checking if ftruncate is compilable... yes checking if ftruncate usage allowed... yes checking if ftruncate might be used... yes checking for sys/types.h... (cached) yes checking for stdlib.h... (cached) yes checking if getaddrinfo can be linked... yes checking if getaddrinfo is prototyped... yes checking if getaddrinfo is compilable... yes checking if getaddrinfo seems to work... yes checking if getaddrinfo usage allowed... yes checking if getaddrinfo might be used... yes checking if getaddrinfo is threadsafe... yes checking if gai_strerror can be linked... yes checking if gai_strerror is prototyped... yes checking if gai_strerror is compilable... yes checking if gai_strerror usage allowed... yes checking if gai_strerror might be used... yes checking if gethostbyaddr can be linked... yes checking if gethostbyaddr is prototyped... yes checking if gethostbyaddr is compilable... yes checking if gethostbyaddr usage allowed... yes checking if gethostbyaddr might be used... yes checking if gethostbyaddr_r can be linked... yes checking if gethostbyaddr_r is prototyped... yes checking if gethostbyaddr_r takes 5 args.... no checking if gethostbyaddr_r takes 7 args.... no checking if gethostbyaddr_r takes 8 args.... yes checking if gethostbyaddr_r is compilable... yes checking if gethostbyaddr_r usage allowed... yes checking if gethostbyaddr_r might be used... yes checking if gethostbyname can be linked... yes checking if gethostbyname is prototyped... yes checking if gethostbyname is compilable... yes checking if gethostbyname usage allowed... yes checking if gethostbyname might be used... yes checking if gethostbyname_r can be linked... yes checking if gethostbyname_r is prototyped... yes checking if gethostbyname_r takes 3 args.... no checking if gethostbyname_r takes 5 args.... no checking if gethostbyname_r takes 6 args.... yes checking if gethostbyname_r is compilable... yes checking if gethostbyname_r usage allowed... yes checking if gethostbyname_r might be used... yes checking if gethostname can be linked... yes checking if gethostname is prototyped... yes checking if gethostname is compilable... yes checking for gethostname arg 2 data type... size_t checking if gethostname usage allowed... yes checking if gethostname might be used... yes checking if getifaddrs can be linked... yes checking if getifaddrs is prototyped... yes checking if getifaddrs is compilable... yes checking if getifaddrs seems to work... yes checking if getifaddrs usage allowed... yes checking if getifaddrs might be used... yes checking if getservbyport_r can be linked... yes checking if getservbyport_r is prototyped... yes checking if getservbyport_r takes 4 args.... no checking if getservbyport_r takes 5 args.... no checking if getservbyport_r takes 6 args.... yes checking if getservbyport_r is compilable... yes checking if getservbyport_r usage allowed... yes checking if getservbyport_r might be used... yes checking for sys/types.h... (cached) yes checking for sys/time.h... (cached) yes checking for time.h... (cached) yes checking if gmtime_r can be linked... yes checking if gmtime_r is prototyped... yes checking if gmtime_r is compilable... yes checking if gmtime_r seems to work... yes checking if gmtime_r usage allowed... yes checking if gmtime_r might be used... yes checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for netinet/in.h... (cached) yes checking for arpa/inet.h... (cached) yes checking if inet_ntoa_r can be linked... no checking if inet_ntoa_r might be used... no checking if inet_ntop can be linked... yes checking if inet_ntop is prototyped... yes checking if inet_ntop is compilable... yes checking if inet_ntop seems to work... yes checking if inet_ntop usage allowed... yes checking if inet_ntop might be used... yes checking if inet_pton can be linked... yes checking if inet_pton is prototyped... yes checking if inet_pton is compilable... yes checking if inet_pton seems to work... yes checking if inet_pton usage allowed... yes checking if inet_pton might be used... yes checking for sys/types.h... (cached) yes checking for unistd.h... (cached) yes checking for sys/socket.h... (cached) yes checking for sys/ioctl.h... (cached) yes checking for stropts.h... no checking if ioctl can be linked... yes checking if ioctl is prototyped... yes checking if ioctl is compilable... yes checking if ioctl usage allowed... yes checking if ioctl might be used... yes checking if ioctl FIONBIO is compilable... yes checking if ioctl FIONBIO usage allowed... yes checking if ioctl FIONBIO might be used... yes checking if ioctl SIOCGIFADDR is compilable... yes checking if ioctl SIOCGIFADDR usage allowed... yes checking if ioctl SIOCGIFADDR might be used... yes checking if ioctlsocket can be linked... no checking if ioctlsocket might be used... no checking if IoctlSocket can be linked... no checking if IoctlSocket might be used... no checking if localtime_r can be linked... yes checking if localtime_r is prototyped... yes checking if localtime_r is compilable... yes checking if localtime_r seems to work... yes checking if localtime_r usage allowed... yes checking if localtime_r might be used... yes checking if memrchr can be linked... yes checking if memrchr is prototyped... no checking if memrchr might be used... no checking if poll can be linked... yes checking if poll is prototyped... yes checking if poll is compilable... yes checking if poll seems to work... yes checking if poll usage allowed... yes checking if poll might be used... yes checking if setsockopt can be linked... yes checking if setsockopt is prototyped... yes checking if setsockopt is compilable... yes checking if setsockopt usage allowed... yes checking if setsockopt might be used... yes checking if setsockopt SO_NONBLOCK is compilable... no checking if setsockopt SO_NONBLOCK might be used... no checking for sys/types.h... (cached) yes checking for signal.h... (cached) yes checking if sigaction can be linked... yes checking if sigaction is prototyped... yes checking if sigaction is compilable... yes checking if sigaction usage allowed... yes checking if sigaction might be used... yes checking if siginterrupt can be linked... yes checking if siginterrupt is prototyped... yes checking if siginterrupt is compilable... yes checking if siginterrupt usage allowed... yes checking if siginterrupt might be used... yes checking if signal can be linked... yes checking if signal is prototyped... yes checking if signal is compilable... yes checking if signal usage allowed... yes checking if signal might be used... yes checking for sys/types.h... (cached) yes checking for setjmp.h... (cached) yes checking if sigsetjmp can be linked... no checking if sigsetjmp seems a macro... yes checking if sigsetjmp is compilable... yes checking if sigsetjmp usage allowed... yes checking if sigsetjmp might be used... yes checking if socket can be linked... yes checking if socket is prototyped... yes checking if socket is compilable... yes checking if socket usage allowed... yes checking if socket might be used... yes checking if socketpair can be linked... yes checking if socketpair is prototyped... yes checking if socketpair is compilable... yes checking if socketpair usage allowed... yes checking if socketpair might be used... yes checking if strcasecmp can be linked... yes checking if strcasecmp is prototyped... yes checking if strcasecmp is compilable... yes checking if strcasecmp usage allowed... yes checking if strcasecmp might be used... yes checking if strcmpi can be linked... no checking if strcmpi might be used... no checking if strdup can be linked... yes checking if strdup is prototyped... yes checking if strdup is compilable... yes checking if strdup usage allowed... yes checking if strdup might be used... yes checking if strerror_r can be linked... yes checking if strerror_r is prototyped... yes checking if strerror_r is compilable... yes checking if strerror_r is glibc like... no checking if strerror_r is POSIX like... yes checking if strerror_r seems to work... yes checking if strerror_r usage allowed... yes checking if strerror_r might be used... yes checking if stricmp can be linked... no checking if stricmp might be used... no checking if strncasecmp can be linked... yes checking if strncasecmp is prototyped... yes checking if strncasecmp is compilable... yes checking if strncasecmp usage allowed... yes checking if strncasecmp might be used... yes checking if strncmpi can be linked... no checking if strncmpi might be used... no checking if strnicmp can be linked... no checking if strnicmp might be used... no checking if strstr can be linked... yes checking if strstr is prototyped... yes checking if strstr is compilable... yes checking if strstr usage allowed... yes checking if strstr might be used... yes checking if strtok_r can be linked... yes checking if strtok_r is prototyped... yes checking if strtok_r is compilable... yes checking if strtok_r usage allowed... yes checking if strtok_r might be used... yes checking if strtoll can be linked... yes checking if strtoll is prototyped... yes checking if strtoll is compilable... yes checking if strtoll usage allowed... yes checking if strtoll might be used... yes checking for sys/types.h... (cached) yes checking for sys/uio.h... (cached) yes checking if writev can be linked... yes checking if writev is prototyped... yes checking if writev is compilable... yes checking if writev usage allowed... yes checking if writev might be used... yes checking for geteuid... yes checking for getpass_r... no checking deeper for getpass_r... but still no checking for getppid... yes checking for getpwuid... yes checking for getpwuid_r... yes checking for getrlimit... yes checking for gettimeofday... yes checking for if_nametoindex... yes checking for mach_absolute_time... no checking deeper for mach_absolute_time... but still no checking for pipe... yes checking for setlocale... yes checking for setmode... no checking deeper for setmode... but still no checking for setrlimit... yes checking for utime... yes checking for utimes... yes checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for netdb.h... (cached) yes checking for getnameinfo... yes checking types of arguments for getnameinfo... const struct sockaddr *,socklen_t,socklen_t,int checking for stdio.h... (cached) yes checking for sys/types.h... (cached) yes checking for sys/socket.h... (cached) yes checking for netdb.h... (cached) yes checking for netinet/in.h... (cached) yes checking for arpa/inet.h... (cached) yes checking for working NI_WITHSCOPEID... no checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK checking for perl... /usr/bin/perl checking for gnroff... /usr/bin/gnroff checking how to use *nroff to get plain text from man pages... -man checking whether to enable the threaded resolver... yes checking whether to use POSIX threads for threaded resolver... auto checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for pthread_create... no checking for pthread_create in -lpthread... yes checking whether to enable verbose strings... yes checking whether to enable SSPI support (Windows native builds only)... no checking whether to enable cryptographic authentication methods... yes checking whether to enable NTLM delegation to winbind's helper... no checking whether to enable TLS-SRP authentication... yes checking whether to enable Unix domain sockets... auto checking for struct sockaddr_un.sun_path... yes checking whether to enable support for cookies... yes checking whether hiding of library internal symbols will actually happen... yes configure: updating cache ../config.cache checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating docs/Makefile config.status: creating docs/examples/Makefile config.status: creating docs/libcurl/Makefile config.status: creating docs/libcurl/opts/Makefile config.status: creating docs/cmdline-opts/Makefile config.status: creating include/Makefile config.status: creating include/curl/Makefile config.status: creating src/Makefile config.status: creating lib/Makefile config.status: creating scripts/Makefile config.status: creating lib/libcurl.vers config.status: creating tests/Makefile config.status: creating tests/certs/Makefile config.status: creating tests/certs/scripts/Makefile config.status: creating tests/data/Makefile config.status: creating tests/server/Makefile config.status: creating tests/libtest/Makefile config.status: creating tests/unit/Makefile config.status: creating packages/Makefile config.status: creating packages/Win32/Makefile config.status: creating packages/Win32/cygwin/Makefile config.status: creating packages/Linux/Makefile config.status: creating packages/Linux/RPM/Makefile config.status: creating packages/Linux/RPM/curl.spec config.status: creating packages/Linux/RPM/curl-ssl.spec config.status: creating packages/Solaris/Makefile config.status: creating packages/EPM/curl.list config.status: creating packages/EPM/Makefile config.status: creating packages/vms/Makefile config.status: creating packages/AIX/Makefile config.status: creating packages/AIX/RPM/Makefile config.status: creating packages/AIX/RPM/curl.spec config.status: creating curl-config config.status: creating libcurl.pc config.status: creating lib/curl_config.h config.status: executing depfiles commands config.status: executing libtool commands configure: Configured to build curl/libcurl: curl version: 7.58.0 Host setup: riscv64-redhat-linux-gnu Install prefix: /usr Compiler: gcc SSL support: no (--with-{ssl,gnutls,nss,polarssl,mbedtls,cyassl,axtls,winssl,darwinssl} ) SSH support: no (--with-libssh2) zlib support: enabled brotli support: no (--with-brotli) GSS-API support: no (--with-gssapi) TLS-SRP support: no (--enable-tls-srp) resolver: POSIX threaded IPv6 support: enabled Unix sockets support: enabled IDN support: no (--with-{libidn2,winidn}) Build libcurl: Shared=yes, Static=no Built-in manual: no (--enable-manual) --libcurl option: enabled (--disable-libcurl-option) Verbose errors: enabled (--disable-verbose) SSPI support: no (--enable-sspi) ca cert bundle: /etc/pki/tls/certs/ca-bundle.crt ca cert path: no ca fallback: no LDAP support: no (--enable-ldap / --with-ldap-lib / --with-lber-lib) LDAPS support: no (--enable-ldaps) RTSP support: enabled RTMP support: no (--with-librtmp) metalink support: no (--with-libmetalink) PSL support: no (--with-libpsl) HTTP2 support: disabled (--with-nghttp2) Protocols: DICT FILE FTP GOPHER HTTP IMAP POP3 RTSP SMTP TELNET TFTP + cd build-full + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro ' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ../configure ++ find .. -name config.guess -o -name config.sub + for i in $(find $(dirname ../configure) -name config.guess -o -name config.sub) ++ basename ../config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ../config.guess ++ basename ../config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ../config.guess '/usr/lib/rpm/redhat/config.guess' -> '../config.guess' + for i in $(find $(dirname ../configure) -name config.guess -o -name config.sub) ++ basename ../config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ../config.sub ++ basename ../config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ../config.sub '/usr/lib/rpm/redhat/config.sub' -> '../config.sub' + '[' 0 = 1 ']' + ../configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --cache-file=../config.cache --disable-static --enable-symbol-hiding --enable-ipv6 --enable-threaded-resolver --with-gssapi --with-nghttp2 --with-ssl --with-ca-bundle=/etc/pki/tls/certs/ca-bundle.crt --enable-ldap --enable-ldaps --enable-manual --with-libidn2 --with-libmetalink --with-libpsl --with-libssh configure: loading cache ../config.cache checking whether to enable maintainer-specific portions of Makefiles... no checking whether make supports nested variables... (cached) yes checking whether to enable debug build options... no checking whether to enable compiler optimizer... (assumed) yes checking whether to enable strict compiler warnings... no checking whether to enable compiler warnings as errors... no checking whether to enable curl debug memory tracking... no checking whether to enable hiding of library internal symbols... yes checking whether to enable c-ares for DNS lookups... no checking whether to disable dependency on -lrt... (assumed no) checking for path separator... : checking for sed... (cached) /usr/bin/sed checking for grep... (cached) /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for riscv64-redhat-linux-gnu-ar... no checking for ar... (cached) /usr/bin/ar checking for a BSD-compatible install... (cached) /usr/bin/install -c checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... (cached) gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... (cached) o checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking how to run the C preprocessor... (cached) gcc -E checking for a sed that does not truncate output... (cached) /usr/bin/sed checking whether to build with code coverage support... no checking whether build environment is sane... yes checking for a thread-safe mkdir -p... (cached) /usr/bin/mkdir -p checking for gawk... (cached) gawk checking whether make sets $(MAKE)... (cached) yes checking for style of include used by make... GNU checking dependency style of gcc... (cached) none checking curl version... 7.58.0 checking build system type... (cached) riscv64-redhat-linux-gnu checking host system type... (cached) riscv64-redhat-linux-gnu checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking for egrep... (cached) /usr/bin/grep -E checking if OS is AIX (to define _ALL_SOURCE)... no checking if _THREAD_SAFE is already defined... no checking if _THREAD_SAFE is actually needed... no checking if _THREAD_SAFE is onwards defined... no checking if _REENTRANT is already defined... no checking if _REENTRANT is actually needed... no checking if _REENTRANT is onwards defined... no checking for special C compiler options needed for large files... (cached) no checking for _FILE_OFFSET_BITS value needed for large files... (cached) no checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... (cached) /usr/bin/grep -F checking for ld used by gcc... (cached) /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... (cached) yes checking for BSD- or MS-compatible name lister (nm)... (cached) /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... (cached) BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... (cached) 1572864 checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... (cached) func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... (cached) func_convert_file_noop checking for /usr/bin/ld option to reload object files... (cached) -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... (cached) objdump checking how to recognize dependent libraries... (cached) pass_all checking for riscv64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... (cached) printf %s\n checking for riscv64-redhat-linux-gnu-ar... (cached) /usr/bin/ar checking for archiver @FILE support... (cached) @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... (cached) strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... (cached) ranlib checking command to parse /usr/bin/nm -B output from gcc object... (cached) ok checking for sysroot... no checking for a working dd... (cached) /usr/bin/dd checking how to truncate binary pipes... (cached) /usr/bin/dd bs=4096 count=1 checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... (cached) no checking for ANSI C header files... (cached) yes checking for sys/types.h... (cached) yes checking for sys/stat.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for memory.h... (cached) yes checking for strings.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking for dlfcn.h... (cached) yes checking for objdir... (cached) .libs checking if gcc supports -fno-rtti -fno-exceptions... (cached) no checking for gcc option to produce PIC... (cached) -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... (cached) yes checking if gcc static flag -static works... (cached) yes checking if gcc supports -c -o file.o... (cached) yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... (cached) no checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to build shared libraries with -version-info... yes checking whether to build shared libraries with -no-undefined... no checking whether to build shared libraries with -mimpure-text... no checking whether to build shared libraries with PIC... yes checking whether to build static libraries with PIC... no checking whether to build shared libraries only... yes checking whether to build static libraries only... no checking for inline... (cached) inline checking if cpp -P is needed... yes checking if cpp -P works... yes checking if compiler is DEC/Compaq/HP C... no checking if compiler is HP-UX C... no checking if compiler is IBM C... no checking if compiler is Intel C... no checking if compiler is clang... no checking if compiler is GNU C... yes checking if compiler is LCC... no checking if compiler is SGI MIPSpro C... no checking if compiler is SGI MIPS C... no checking if compiler is SunPro C... no checking if compiler is Tiny C... no checking if compiler is Watcom C... no checking if compiler accepts some basic options... yes configure: compiler options added: -Werror-implicit-function-declaration checking if compiler accepts debug disabling options... yes configure: compiler options added: checking if compiler optimizer assumed setting might be used... yes checking if compiler accepts optimizer enabling options... yes configure: compiler options added: checking if compiler accepts strict warning options... yes configure: compiler options added: -Wno-system-headers checking if compiler halts on compilation errors... yes checking if compiler halts on negative sized arrays... yes checking if compiler halts on function prototype mismatch... yes checking if compiler supports hiding library internal symbols... yes checking for windows.h... (cached) no checking whether build target is a native Windows one... (cached) no checking whether build target supports WIN32 file API... no checking for good-to-use Mac CFLAGS... no checking to see if the compiler supports __builtin_available()... no checking whether to support http... yes checking whether to support ftp... yes checking whether to support file... yes checking whether to support ldap... yes checking whether to support ldaps... yes checking whether to support rtsp... yes checking whether to support proxies... yes checking whether to support dict... yes checking whether to support telnet... yes checking whether to support tftp... yes checking whether to support pop3... yes checking whether to support imap... yes checking whether to support smb... yes checking whether to support smtp... yes checking whether to support gopher... yes checking whether to provide built-in manual... yes checking whether to enable generation of C code... yes checking whether to use libgcc... no checking if X/Open network library is required... no checking for gethostbyname... (cached) yes checking for windows.h... (cached) no checking for winsock.h... (cached) no checking for winsock2.h... (cached) no checking for connect in libraries... yes checking whether time.h and sys/time.h may both be included... (cached) yes checking for sys/types.h... (cached) yes checking for sys/time.h... (cached) yes checking for time.h... (cached) yes checking for monotonic clock_gettime... yes checking for clock_gettime in libraries... no additional lib required checking if monotonic clock_gettime works... yes checking for riscv64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for zlib options with pkg-config... found checking for zlib.h... (cached) yes configure: found both libz and libz.h header checking for BrotliDecoderDecompress in -lbrotlidec... (cached) no checking for brotli/decode.h... (cached) no checking for lber.h... no checking for ldap.h... no checking for ldapssl.h... no checking for ldap_ssl.h... no checking for LDAP libraries... cannot find LDAP libraries configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled checking whether to enable IPv6... yes checking if struct sockaddr_in6 has sin6_scope_id member... yes checking if argv can be written to... yes checking if GSS-API support is requested... yes checking for gss.h... (cached) no checking for gssapi/gssapi.h... (cached) no checking for gssapi/gssapi_generic.h... (cached) no checking for gssapi/gssapi_krb5.h... (cached) no checking for gssapi.h... (cached) no configure: WARNING: disabling GSS-API support since no header files were found checking whether to enable Windows native SSL/TLS (Windows native builds only)... no checking whether to enable Apple OS native SSL/TLS... no checking for riscv64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for openssl options with pkg-config... no checking for HMAC_Update in -lcrypto... (cached) no checking for HMAC_Init_ex in -lcrypto... (cached) no checking OpenSSL linking with -ldl... no checking OpenSSL linking with -ldl and -lpthread... no checking for ssl_version in -laxtls... (cached) no configure: WARNING: SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more. configure: WARNING: Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls, --with-winssl, or --with-darwinssl to address this. checking default CA cert bundle/path... /etc/pki/tls/certs/ca-bundle.crt checking whether to use builtin CA store of SSL library... no checking for library containing psl_builtin... no configure: WARNING: libpsl was not found checking for riscv64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for libmetalink options with pkg-config... found checking if libmetalink is recent enough... yes (0.1.3) checking for riscv64-redhat-linux-gnu-pkg-config... (cached) /usr/bin/riscv64-redhat-linux-gnu-pkg-config checking for libssh options with pkg-config... no checking for ssh_new in -lssh... no checking libssh/libssh.h usability... no checking libssh/libssh.h presence... no checking for libssh/libssh.h... no configure: error: libSSH libs and/or directories were not found where specified! error: Bad exit status from /var/tmp/rpm-tmp.zOjdI8 (%build) RPM build errors: user mockbuild does not exist - using root group mockbuild does not exist - using root user mockbuild does not exist - using root group mockbuild does not exist - using root user mockbuild does not exist - using root group mockbuild does not exist - using root user mockbuild does not exist - using root group mockbuild does not exist - using root user mockbuild does not exist - using root group mockbuild does not exist - using root Bad exit status from /var/tmp/rpm-tmp.zOjdI8 (%build) ++ cleanup ++ set +e ++ sync ++ sleep 5 ++ sync ++ mount.static -o remount,ro / ++ poweroff reboot: Power down Power off