 	 ALCATEL-IND1-UDP-RELAY-MIB DEFINITIONS ::= BEGIN
	 IMPORTS
	 	  RowStatus 			 FROM SNMPv2-TC

		  IpAddress,
		  MODULE-IDENTITY,
		  OBJECT-TYPE,
		  OBJECT-IDENTITY,
		  Unsigned32,
		  Counter32  FROM SNMPv2-SMI

		  DisplayString,
		  MacAddress,
                  TEXTUAL-CONVENTION     FROM SNMPv2-TC

		  MODULE-COMPLIANCE,
		  OBJECT-GROUP		FROM SNMPv2-CONF
		  routingIND1UdpRelay, alaDhcpClientTraps  FROM ALCATEL-IND1-BASE
		  InterfaceIndex      FROM IF-MIB;


	     alcatelIND1UDPRelayMIB MODULE-IDENTITY
	 	LAST-UPDATED "200704030000Z"
		ORGANIZATION  "Alcatel -Architects Of An Internet World "
		CONTACT-INFO
		"Please consult with Customer Service to ensure the most appropriate
		version of this document  is used with the products in question:

			Alcatel-Lucent, Enterprise Solutions Division
			(Formerly Alcatel Internetworking, Incorporated)
				26801 West Agoura Road
			    Agoura Hills, CA 91301-5122
			      United States Of America

		Telephone:		North America  +1 800 995 2696
					Latin America  +1 877 919 9526
					Europe	       +31 23 556 0100
					Asia	       +65 394 7933
					All Other      +1 818 878 4507

		Electronic Mail:	support@ind.alcatel.com
		World Wide Web:	        http://alcatel-lucent.com/wps/portal/enterprise
		File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"



	        DESCRIPTION
			      "This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):

             For the Birds Of Prey Product Line
	     UDP Relay to forward BOOTP/DHCP requests across VLANs

	     The right to make changes in specification and other information
             contained in this document without prior notice is reserved.

             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.

                         Copyright (C) 1995-2007 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"

	      	REVISION      "200704030000Z"
	     DESCRIPTION
            "The latest version of this MIB Module."
		      ::= {routingIND1UdpRelay 1}



        alcatelIND1UDPRelayMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
            Subsystem Managed Objects."
        ::= { alcatelIND1UDPRelayMIB 1 }


	alcatelIND1UDPRelayMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
            Subsystem Conformance Information."
        ::= { alcatelIND1UDPRelayMIB 2 }

	alcatelIND1UDPRelayMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
	     Subsystem Units Of Conformance."
        ::= { alcatelIND1UDPRelayMIBConformance 1 }



	alcatelIND1UDPRelayMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For UDP Relay
            Subsystem Compliance Statements."
        ::= { alcatelIND1UDPRelayMIBConformance 2 }


   iphelperMIB OBJECT IDENTIFIER ::= { alcatelIND1UDPRelayMIBObjects 1 }




   IphelperServIndex ::= TEXTUAL-CONVENTION
     STATUS current
      DESCRIPTION
      "IphelperServIndex provides a means to specify a service to be forwarded
       by UDP Relay.

       Some values indicate a specfic protocol and associated UDP port(s):
        ----------------             ----------           -----------
	Value                        Protocol             UDP port(s)
        ----------------             ----------           -----------
        iphelperBootp                BOOTP/DHCP           67/68
        iphelperNbnsNbdd             NBNS/NBDD            137/138
        iphelperNbdd                 NBDD                 138
        iphelperDns                  DNS                  53
        iphelperTacacs               TACACS               65
        iphelperTftp                 TFTP                 69
        iphelperNtp                  NTP                  123

       The remaining values are to be used for other services:
        ----------------             ----------           -----------
	Value                        Protocol             UDP port
        ----------------             ----------           -----------
        iphelperOther1                   ?                user-specified
        iphelperOther2                   ?                user-specified
        iphelperOther3                   ?                user-specified
        iphelperOther4                   ?                user-specified
        iphelperOther5                   ?                user-specified
        iphelperOther6                   ?                user-specified
        iphelperOther7                   ?                user-specified
        iphelperOther8                   ?                user-specified
        iphelperOther9                   ?                user-specified
        iphelperOther10                  ?                user-specified
      "
     SYNTAX INTEGER {
        iphelperBootp(1),
        iphelperNbnsNbdd(2),
        iphelperNbdd(3),
        iphelperDns(4),
        iphelperTacacs(5),
        iphelperTftp(6),
        iphelperNtp(7),
        iphelperOther1(8),
        iphelperOther2(9),
        iphelperOther3(10),
        iphelperOther4(11),
        iphelperOther5(12),
        iphelperOther6(13),
        iphelperOther7(14),
        iphelperOther8(15),
        iphelperOther9(16),
        iphelperOther10(17),
	iphelperOther11(18),
	iphelperOther12(19),
	iphelperOther13(20),
	iphelperOther14(21),
	iphelperOther15(22),
	iphelperOther16(23),
	iphelperOther17(24),
	iphelperOther18(25),
	iphelperOther19(26),
	iphelperOther20(27),
	iphelperOther21(28),
	iphelperOther22(29),
	iphelperOther23(30),
	iphelperOther24(31),
	iphelperOther25(32)
     }

       IphelpereOption82ASCIIFieldType ::= TEXTUAL-CONVENTION
       STATUS        current
       DESCRIPTION
            "Ip helper Option 82 Format ASCII field type"
            SYNTAX  INTEGER {
		none(0),
                macAddress(1),
                systemName(2),
                userString(3),
                interfaceAlias(4),
                vlan(5),
                interface(6)
            }

   iphelperTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of active UDP Relay Service instances."
  ::= { iphelperMIB 1 }


  iphelperEntry  OBJECT-TYPE
    SYNTAX	IphelperEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay table"
    INDEX { iphelperService, iphelperForwAddr ,iphelperVlan }
    ::= { iphelperTable 1 }

    IphelperEntry ::= SEQUENCE {
      iphelperService
      		IphelperServIndex,
      iphelperForwAddr
      		IpAddress,
      iphelperVlan
                Unsigned32,
      iphelperStatus
       RowStatus
   }

   iphelperService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-create
	STATUS	current
	DESCRIPTION
		"This specifies a service to be forwarded by UDP Relay."
  ::= { iphelperEntry 1 }

  iphelperForwAddr OBJECT-TYPE
  	SYNTAX IpAddress
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
		"This specifies relayed service's forwarding address.
		For entries with iphelperService equal to iphelperBootp(1):
		  This object can either be set to a distinct IP address (e.g. the address
		  of a server), to an IP broadcast address or a VLAN. A value
		  of 0.0.0.0 indicates that no forwarding address is being used.
                For entries with iphelperService not equal to ipHelperBootp(1),
		  this object is not settable."
  ::= { iphelperEntry 2 }

  iphelperVlan OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
		"This specifies a Vlan to which the service is to be forwarded.
		For entries with iphelperService equal to iphelperBootp(1),
		  a value of 0 indicates that no vlan is being used.
                For entries with iphelperService not equal to ipHelperBootp(1),
		  only non-zero values may be specified."
  ::= { iphelperEntry 3 }

  iphelperStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-create
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
  ::= { iphelperEntry 4 }


iphelperStatTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IphelperStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"This keeps statistics for each service by server address."
::= { iphelperMIB 2 }

iphelperStatEntry  OBJECT-TYPE
	SYNTAX  IphelperStatEntry
	MAX-ACCESS  not-accessible
	STATUS	current
	DESCRIPTION
		"An entry in the stat table."
  	INDEX {iphelperServerAddress}
::= { iphelperStatTable 1 }


IphelperStatEntry ::= SEQUENCE {
	iphelperServerAddress
                IpAddress,
	iphelperRxFromClient
		Unsigned32,
        iphelperTxToServer
                Unsigned32,
        iphelperMaxHopsViolation
                Unsigned32,
        iphelperForwDelayViolation
                Unsigned32,
        iphelperResetAll
                INTEGER,
        iphelperAgentInfoViolation
                Counter32,
        iphelperInvalidGatewayIP
                Counter32,
        iphelperInvalidAgentInfoOptFrmSrver
                Counter32
		}

iphelperServerAddress  OBJECT-TYPE
        SYNTAX IpAddress
	MAX-ACCESS read-write
	STATUS	current
	DESCRIPTION
               "This specifies the unique server address."
::= { iphelperStatEntry 1 }

iphelperRxFromClient OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS	current
	DESCRIPTION
		"This keeps track of the number of packets recieved from the client."
::= { iphelperStatEntry 2 }


iphelperTxToServer  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets transmitted  to the server."
::= { iphelperStatEntry  3}


iphelperMaxHopsViolation  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets dropped due to max hops violation.
		Only meaningful for entries with ipHelperService equal to iphelperBootp(1)."
::= { iphelperStatEntry  4}

iphelperForwDelayViolation  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to forward delay violation.
		Only meaningful for entries with ipHelperService equal to iphelperBootp(1)."
::= { iphelperStatEntry  5}

iphelperResetAll  OBJECT-TYPE
	SYNTAX	INTEGER (0..1)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
            "This parameter resets all the stats."
::= { iphelperStatEntry 6}

iphelperAgentInfoViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to DHCP packet with giaddr
		field not equal to zero and Relay Agent Information option is present and also the
		Relay Agent Information Policy is set to DROP."
::= { iphelperStatEntry  7}

iphelperInvalidGatewayIP  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to giaddr matching a local
		subnet and Relay Agent Information option is present in the DHCP packet."
::= { iphelperStatEntry  8}

iphelperInvalidAgentInfoOptFrmSrver  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to invalid from DHCP server
		with Relay Agent Information option in the DHCP packet."
::= { iphelperStatEntry  9}

iphelperForwDelay  OBJECT-TYPE
  	SYNTAX Unsigned32 (0..65535)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This sets the BOOTP/DHCP relay's forwarding delay and
		is only used by the BOOTP/DHCP service. For other services
		it is ignored.It is typically set as seconds, but the value is totally
		client dependent.This relay will not forward frames until client
		frames have 'secs' field set to atleast the value
		iphelperForwDelay."
::= { iphelperMIB 3 }

iphelperMaxHops OBJECT-TYPE
	SYNTAX Unsigned32 (1..16)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This sets the BOOTP/DHCP relay's maximum hops
		forwarding limit and is only used by the BOOTP/DHCP service. For
		other services it is ignored. If a frame arrives with hopcount greater than
	or equal to iphelperMaxHops, it will be dropped."
::= {iphelperMIB  4}

iphelperForwardOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  standard(1),
		  avlanOnly(2),
                  perVlanOnly(3)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This is only significant for the BOOTP/DHCP service. It allows the relay
		to forward DHCP requests only when they are issued by an Authenticated Vlan
		client.Needed to prevent having multiple relays enabled on the same vlan.
		Default value is standard"
::= {iphelperMIB  5}


iphelperBootupOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  enable(1),
		  disable(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This is only significant for the BOOTP/DHCP service.  It allows the user to
		enable or disable the functionality of the relay to get an IP address at the
		time of system boot-up and assign that IP address as the router IP of the
		default VLAN. Default option is Disable."
::= {iphelperMIB 6}


iphelperBootupPacketOption OBJECT-TYPE
	SYNTAX INTEGER
		{
		  bootp(1),
		  dhcp(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This is only significant for the BOOTP/DHCP service.  It allows the user to
		select the packet format with the choices of BOOTP and DHCP to be used to get
		an IP address at the time of system boot-up.
                 Default option is DHCP"
::= {iphelperMIB 7}



   iphelperxServicePortAssociationTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperxServicePortAssociationEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of services being forwarded with their associated ports.
                 An entry in this table is allowed only for the services listed below:
                     iphelperBootp
                     iphelperNbnsNbdd
                     iphelperNbdd
                     iphelperDns
                     iphelperTacacs
                     iphelperTftp
                     iphelperNtp
                 "

  ::= { iphelperMIB 8 }


  iphelperxServicePortAssociationEntry  OBJECT-TYPE
    SYNTAX	IphelperxServicePortAssociationEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay PortAssociation table"
    INDEX { iphelperxServicePortAssociationService }
    ::= { iphelperxServicePortAssociationTable 1 }

    IphelperxServicePortAssociationEntry ::= SEQUENCE {
      iphelperxServicePortAssociationService
      		IphelperServIndex,
      iphelperxServicePortAssociationPort
                Unsigned32,
      iphelperxServicePortAssociationName
	        DisplayString,
      iphelperxServicePortAssociationStatus
       RowStatus
   }

   iphelperxServicePortAssociationService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-write
	STATUS	current
	DESCRIPTION
		"This specifies the service being forwarded.
		 Legal values:
                     iphelperBootp(1)
                     iphelperNbnsNbdd(2)
                     iphelperNbdd(3)
                     iphelperDns(4)
                     iphelperTacacs(5)
                     iphelperTftp(6)
                     iphelperNtp(7)
                "

  ::= { iphelperxServicePortAssociationEntry 1 }

  iphelperxServicePortAssociationPort OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "UDP port for the service."
  ::= { iphelperxServicePortAssociationEntry 2 }

  iphelperxServicePortAssociationName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..30))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
            "The name and/or description of the service."
  ::= { iphelperxServicePortAssociationEntry 3 }

  iphelperxServicePortAssociationStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
  ::= { iphelperxServicePortAssociationEntry 4 }


   iphelperxPortServiceAssociationTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperxPortServiceAssociationEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of services being forwarded with their associated ports.
                 An entry in this table is allowed only for those services
		 NOT using one of the following well-known ports:
                    53  - DNS
                    65  - TACACS
		    67  - BOOTP/DHCP
		    68  - BOOTP/DHCP
                    69  - TFTP
                    123 - NTP
		    137 - NBNS
		    138 - NBDD
                 "

  ::= { iphelperMIB 9 }


  iphelperxPortServiceAssociationEntry  OBJECT-TYPE
    SYNTAX	IphelperxPortServiceAssociationEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay PortAssociation table"
    INDEX { iphelperxPortServiceAssociationPort }
    ::= { iphelperxPortServiceAssociationTable 1 }

    IphelperxPortServiceAssociationEntry ::= SEQUENCE {
      iphelperxPortServiceAssociationService
      		IphelperServIndex,
      iphelperxPortServiceAssociationPort
                Unsigned32,
      iphelperxPortServiceAssociationName
	        DisplayString,
      iphelperxPortServiceAssociationStatus
       RowStatus
   }

   iphelperxPortServiceAssociationService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"This specifies the service being forwarded."

  ::= { iphelperxPortServiceAssociationEntry 1 }

  iphelperxPortServiceAssociationPort OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "UDP port for the service.
		 May not be one of the following well-known ports:
                    53  - DNS
                    65  - TACACS
		    67  - BOOTP/DHCP
		    68  - BOOTP/DHCP
                    69  - TFTP
                    123 - NTP
		    137 - NBNS
		    138 - NBDD
                 "
  ::= { iphelperxPortServiceAssociationEntry 2 }

  iphelperxPortServiceAssociationName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..30))
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
            "The name and/or description of the service."
  ::= { iphelperxPortServiceAssociationEntry 3 }

  iphelperxPortServiceAssociationStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
  ::= { iphelperxPortServiceAssociationEntry 4 }


   iphelperxPropertiesTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IphelperPropertiesEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      		"A list of services being forwarded with their associated ports.
		 There is an entry in this table for each service being forwarded
		 by UDP Relay, including those with implied protocol/port associations."
  ::= { iphelperMIB 10 }


  iphelperxPropertiesEntry  OBJECT-TYPE
    SYNTAX	IphelperPropertiesEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
    		" An entry in UDP Relay Service Properties table"
    INDEX { iphelperxPropertiesService }
    ::= { iphelperxPropertiesTable 1 }

    IphelperPropertiesEntry ::= SEQUENCE {
      iphelperxPropertiesService
      		IphelperServIndex,
      iphelperxPropertiesPort
                Unsigned32,
      iphelperxPropertiesName
	        DisplayString
   }

   iphelperxPropertiesService  OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"This specifies the service to be  forwarded."
  ::= { iphelperxPropertiesEntry 1 }

  iphelperxPropertiesPort OBJECT-TYPE
        SYNTAX Unsigned32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "UDP port for the service."
  ::= { iphelperxPropertiesEntry 2 }

  iphelperxPropertiesName OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..30))
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
            "The name/description of the service."
  ::= { iphelperxPropertiesEntry 3 }


  iphelperxStatTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF IphelperxStatEntry
	MAX-ACCESS	not-accessible
	STATUS	current
	DESCRIPTION
		"This keeps statistics for each service by server address."
  ::= { iphelperMIB 11 }

  iphelperxStatEntry  OBJECT-TYPE
	SYNTAX  IphelperxStatEntry
	MAX-ACCESS  not-accessible
	STATUS	current
	DESCRIPTION
		"An entry in the stat table."
  	INDEX {iphelperxStatService, iphelperxStatServerAddress}
  ::= { iphelperxStatTable 1 }


  IphelperxStatEntry ::= SEQUENCE {
        iphelperxStatService
      		IphelperServIndex,
	iphelperxStatServerAddress
                IpAddress,
	iphelperxStatVlan
                Unsigned32,
	iphelperxStatRxFromClient
		Unsigned32,
        iphelperxStatTxToServer
                Unsigned32,
        iphelperxStatReset
                INTEGER
		}

  iphelperxStatService OBJECT-TYPE
   	SYNTAX  IphelperServIndex
	MAX-ACCESS  read-only
	STATUS	current
	DESCRIPTION
		"This specifies the service being forwarded."
  ::= { iphelperxStatEntry 1 }

  iphelperxStatServerAddress  OBJECT-TYPE
        SYNTAX IpAddress
	MAX-ACCESS read-write
	STATUS	current
	DESCRIPTION
               "This specifies the unique server address."
  ::= { iphelperxStatEntry 2 }

  iphelperxStatVlan  OBJECT-TYPE
        SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS	current
	DESCRIPTION
               "This specifies the unique Vlan of the server."
  ::= { iphelperxStatEntry 3 }

  iphelperxStatRxFromClient OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"This keeps track of the number of packets recieved from the client."
  ::= { iphelperxStatEntry 4 }


  iphelperxStatTxToServer  OBJECT-TYPE
	SYNTAX	Unsigned32 (0..65535)
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              " This keeps track of the number of packets transmitted  to the server."
  ::= { iphelperxStatEntry  5}


  iphelperxStatReset  OBJECT-TYPE
	SYNTAX	INTEGER (0..1)
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
            "This parameter resets all the stats for this entry."
  ::= { iphelperxStatEntry 6}

iphelperAgentInformation OBJECT-TYPE
        SYNTAX INTEGER
                {
                  enable(1),
                  disable(2)
                }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "This is only significant for the BOOTP/DHCP service.  It allows the user to
                enable or disable the functionality of inserting the relay agent information
                option to the DHCP option field according to RFC 3046."
::= {iphelperMIB 12}


iphelperAgentInformationPolicy OBJECT-TYPE
        SYNTAX INTEGER
                {
                  drop(1),
                  keep(2),
                  replace(3)
                }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "This is only significant for the BOOTP/DHCP service.  It allows the user to
                select the policy of either drop, keep or replace the relay agent information
                option if it is already present in the DHCP packet."
::= {iphelperMIB 13}


    iphelperDhcpSnoopingVlanTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IphelperDhcpSnoopingVlanEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"A list of vlans that have DHCP Snooping enabled."
    ::= { iphelperMIB 14 }


    iphelperDhcpSnoopingVlanEntry  OBJECT-TYPE
	SYNTAX  IphelperDhcpSnoopingVlanEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A DHCP Snooping VLAN entry."
	INDEX { iphelperDhcpSnoopingVlanNumber }
    ::= { iphelperDhcpSnoopingVlanTable 1 }


    IphelperDhcpSnoopingVlanEntry ::= SEQUENCE {
	iphelperDhcpSnoopingVlanNumber
		INTEGER,
	iphelperDhcpSnoopingVlanOpt82DataInsertionStatus
		INTEGER,
	iphelperDhcpSnoopingVlanMacAddrVerificationStatus
		INTEGER,
	iphelperDhcpSnoopingVlanTrafficSuppressionStatus
		INTEGER,
        iphelperDhcpSnoopingVlanStatus
		RowStatus
	}

    iphelperDhcpSnoopingVlanNumber  OBJECT-TYPE
	    SYNTAX  INTEGER (1..4094)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		 "The VLAN number identifying this instance. Valid
		  range from 1 to 4094."
    ::= { iphelperDhcpSnoopingVlanEntry 1 }

    iphelperDhcpSnoopingVlanOpt82DataInsertionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Option-82 data insertion status. Default value
	  	 is enabled, which means once the VLAN is enabled for DHCP
		 snooping, the Option-82 field will be inserted in the DHCP
	  	 packets between the Relay Agent and the DHCP Server, on all
		 the ports belong to the VLAN."
		 DEFVAL { enabled }
    ::= { iphelperDhcpSnoopingVlanEntry 2 }

    iphelperDhcpSnoopingVlanMacAddrVerificationStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping MAC Address verification status. Default value
	  	 is enabled. Once enabled, for all the incoming DHCP traffic to
  		 those DHCP Snooping enabled vlan port, it compares the source MAC
		 address and the client Hardware Address in the DHCP packet. If mismatch,
		 the packet will be dropped."
		 DEFVAL { enabled }
    ::= { iphelperDhcpSnoopingVlanEntry 3 }


    iphelperDhcpSnoopingVlanTrafficSuppressionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Traffic Suppression status. Default value
	  	 is disabled. Once enabled, for all the incoming DHCP traffic to
  		 those DHCP Snooping enabled vlan port will not be flooded throughout
		 the VLAN. The usage of UDP/DHCP Relay Agent will be enforced. Traffic
		 will always be forwarded to CPU."
		 DEFVAL { disabled }
    ::= { iphelperDhcpSnoopingVlanEntry 4 }

    iphelperDhcpSnoopingVlanStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
    ::= { iphelperDhcpSnoopingVlanEntry 5 }


    iphelperDhcpSnoopingPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IphelperDhcpSnoopingPortEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"A list of ports that have DHCP Snooping trust status."
    ::= { iphelperMIB 15 }


    iphelperDhcpSnoopingPortEntry  OBJECT-TYPE
	SYNTAX  IphelperDhcpSnoopingPortEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A DHCP Snooping Port entry."
	INDEX { iphelperDhcpSnoopingPortIfIndex }
    ::= { iphelperDhcpSnoopingPortTable 1 }


    IphelperDhcpSnoopingPortEntry ::= SEQUENCE {
	iphelperDhcpSnoopingPortIfIndex
		InterfaceIndex,
	iphelperDhcpSnoopingPortTrustMode
		INTEGER,
	iphelperDhcpSnoopingPortTrafficSuppression
		INTEGER,
	iphelperDhcpSnoopingPortMacAddrViolation
		Counter32,
	iphelperDhcpSnoopingPortDhcpServerViolation
		Counter32,
	iphelperDhcpSnoopingPortRelayAgentViolation
		Counter32,
	iphelperDhcpSnoopingPortOption82Violation
		Counter32,
	iphelperDhcpSnoopingPortBindingViolation
		Counter32,
	iphelperDhcpSnoopingPortIpSourceFiltering
		INTEGER
	}

    iphelperDhcpSnoopingPortIfIndex  OBJECT-TYPE
	    SYNTAX  InterfaceIndex
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		 "The ifIndex subindex identifying this instance."
    ::= { iphelperDhcpSnoopingPortEntry 1 }

    iphelperDhcpSnoopingPortTrustMode OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	blocked(1),
		clientOnly(2),
	    	trusted(3)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping's VLAN port's trust mode. Default value
	  	 is client-only, which means once the VLAN is enabled for DHCP
		 snooping, the vlan ports only allow DHCP client packets. Blocked
		 means all DHCP traffic is block on the port. Trusted means all
		 DHCP traffic is allowed on the port"
		 DEFVAL { clientOnly }
    ::= { iphelperDhcpSnoopingPortEntry 2 }

    iphelperDhcpSnoopingPortTrafficSuppression OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Traffic Suppression status. Default value
	  	 is disabled. Once enabled, for all the incoming DHCP traffic to
  		 those ports will not be flooded instead will always be forwarded to CPU."
		 DEFVAL { disabled }
    ::= { iphelperDhcpSnoopingPortEntry 3 }

    iphelperDhcpSnoopingPortMacAddrViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to DHCP
	       packet with the source MAC Address not equal the client DHCP
	       Hardware address in the DHCP packet."
    ::= { iphelperDhcpSnoopingPortEntry 4 }

    iphelperDhcpSnoopingPortDhcpServerViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to receiving
	       an DHCP server packet on a DHCP Snooping enabled port."
    ::= { iphelperDhcpSnoopingPortEntry 5 }

    iphelperDhcpSnoopingPortOption82Violation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to a relay
	       agent forards a packet that includes option 82 info to an untrusted port."
    ::= { iphelperDhcpSnoopingPortEntry 6 }

    iphelperDhcpSnoopingPortRelayAgentViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to an DHCP
	       relay agent forwards a DHCP packate includes an relay agent ip address that
 	       is not 0.0.0.0."
    ::= { iphelperDhcpSnoopingPortEntry 7 }

    iphelperDhcpSnoopingPortBindingViolation  OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "This keeps track of the number of packets dropped due to receiving
	       an DHCP Relase or DHCP Decline message that contains a MAC address in the
	       DHCP snooping binding table, but the interface information in the binding
	       table does not match the interface on which the message was received."
    ::= { iphelperDhcpSnoopingPortEntry 8 }

    iphelperDhcpSnoopingPortIpSourceFiltering OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping IP Source filtering  status. Default value
	  	 is disabled. Once enabled, only the incoming traffic with the proper
  		 client IP address, MAC address and port will be allowed."
		 DEFVAL { disabled }
    ::= { iphelperDhcpSnoopingPortEntry 9 }


    iphelperDhcpSnoopingBindingTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IphelperDhcpSnoopingBindingEntry
	MAX-ACCESS not-accessible
	STATUS current
	DESCRIPTION
      		"DHCP Snooping binding table."
    ::= { iphelperMIB 16 }


    iphelperDhcpSnoopingBindingEntry  OBJECT-TYPE
	SYNTAX  IphelperDhcpSnoopingBindingEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
		"A DHCP Snooping binding entry."
	INDEX { iphelperDhcpSnoopingBindingMacAddress, iphelperDhcpSnoopingBindingIfIndex }
    ::= { iphelperDhcpSnoopingBindingTable 1 }


    IphelperDhcpSnoopingBindingEntry ::= SEQUENCE {
	iphelperDhcpSnoopingBindingMacAddress
		MacAddress,
	iphelperDhcpSnoopingBindingIfIndex
		InterfaceIndex,
	iphelperDhcpSnoopingBindingIpAddress
		IpAddress,
	iphelperDhcpSnoopingBindingVlan
		Unsigned32,
	iphelperDhcpSnoopingBindingLeaseTime
		Unsigned32,
	iphelperDhcpSnoopingBindingType
		INTEGER,
        iphelperDhcpSnoopingBindingRowStatus
		RowStatus
	}

    iphelperDhcpSnoopingBindingMacAddress  OBJECT-TYPE
	    SYNTAX  MacAddress
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		 "The MAC Address subindex identifying this instance."
    ::= { iphelperDhcpSnoopingBindingEntry 1 }

    iphelperDhcpSnoopingBindingIfIndex OBJECT-TYPE
	    SYNTAX  InterfaceIndex
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The IfIndex subindex identifying this instance. It is the
	 	 the interface where the DHCP request is coming in from."
    ::= { iphelperDhcpSnoopingBindingEntry 2 }


    iphelperDhcpSnoopingBindingIpAddress  OBJECT-TYPE
	SYNTAX	IpAddress
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              "The Ip Address offered by the DHCP Server to the Client."
    ::= { iphelperDhcpSnoopingBindingEntry 3 }


    iphelperDhcpSnoopingBindingVlan OBJECT-TYPE
	    SYNTAX  Unsigned32
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"It is the VLAN Id where the DHCP client belongs to."
    ::= { iphelperDhcpSnoopingBindingEntry 4 }


    iphelperDhcpSnoopingBindingLeaseTime  OBJECT-TYPE
	SYNTAX	Unsigned32
	MAX-ACCESS	read-only
	STATUS current
	DESCRIPTION
              "The lease time of the client's IP Address."
    ::= { iphelperDhcpSnoopingBindingEntry 5 }

    iphelperDhcpSnoopingBindingType  OBJECT-TYPE
	SYNTAX  INTEGER {
	  dynamic(1),
	  static(2)
	}
	MAX-ACCESS	read-write
	STATUS current
	DESCRIPTION
              "The learning/configuration nature of the binding entry.
	       Normally, the entries are learned dynamically, while it
	       also can be statically/manually configured."
	DEFVAL { dynamic }
    ::= { iphelperDhcpSnoopingBindingEntry 6 }


    iphelperDhcpSnoopingBindingRowStatus OBJECT-TYPE
	SYNTAX RowStatus
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
            "Row Status for creating/deleting"
    ::= { iphelperDhcpSnoopingBindingEntry 7 }




    iphelperDhcpSnooping OBJECT-TYPE
            SYNTAX INTEGER
                {
                  switchLevel(1),
                  disabled(2),
		  vlanLevel(3)
                }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                    "Enabling DHCP Snooping at the switch level. For the vlan level,
		     it is enabled implicitly when an individual vlan's DHCP Snooping
		     is enbled."
    ::= {iphelperMIB 17}


    iphelperDhcpSnoopingOpt82DataInsertionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Option-82 data insertion status at switch level.
		 Default value is enabled, the Option-82 field will be inserted in the DHCP
	  	 packets between the Relay Agent and the DHCP Server, on all
		 the ports belong to the switch."
		 DEFVAL { enabled }
    ::= { iphelperMIB 18 }

    iphelperDhcpSnoopingMacAddrVerificationStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping MAC Address verification status at switch level.
		 Default value is enabled. Once enabled, for all the incoming DHCP traffic to
  		 the port, it compares the source MAC address and the client Hardware
		 Address in the DHCP packet. If mismatch, the packet will be dropped."
		 DEFVAL { enabled }
     ::= { iphelperMIB 19 }


     iphelperDhcpSnoopingTrafficSuppressionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Traffic Suppression status at switch level. Default value
	  	 is disabled. Once enabled, for all the incoming DHCP traffic to
  		 the ports will not be flooded  The usage of UDP/DHCP Relay Agent will be
		 enforced. DHCP Traffic will always be forwarded to CPU."
		 DEFVAL { disabled }
    ::= { iphelperMIB 20 }


    iphelperDhcpSnoopingBindingStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"This object specifies if the capability of building the DHCP Snooping
		 Binding Table/Database is enable or not. By default, it is enabled.
		 It is applicable for both switch-level or vlan-level DHCP Snooping."
	    DEFVAL { enabled }
     ::= { iphelperMIB 21 }

    iphelperDhcpSnoopingBindingDatabaseSyncTimeout OBJECT-TYPE
	    SYNTAX	Unsigned32 (180..600)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"The DHCP Snooping Binding Database synchronization timeout value. It is
		 used to specify the synchronization frequency, in seconds, between the
		 binding table in memory and the binding file in flash."
	    DEFVAL { 300 }
     ::= { iphelperMIB 22 }

    iphelperDhcpSnoopingBindingDatabaseLastSyncTime OBJECT-TYPE
	    SYNTAX	DisplayString
	    MAX-ACCESS  read-only
	    STATUS  current
	    DESCRIPTION
		"The time stamp of the last successuful DHCP Snooping Binding
		 Database synchronization."
     ::= { iphelperMIB 23 }

    iphelperDhcpSnoopingBindingDatabaseAction OBJECT-TYPE
	SYNTAX INTEGER {
		noaction(0),
		purge(1),
		renew(2)
	}
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"This object identifies the action to be performed. Purge:
		 means to clear the binding table entries in the memory.
		 Renew: means to populate the binding table entries from the
		 flash file."
     ::= { iphelperMIB 24 }


    iphelperTrafficSuppressionStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP packet traffic suppression status. By default, it is disabled.
		 Once enabled, all incoming DHCP packets will be sent to software only,
		 and no longer be hardware flooded."
	    DEFVAL { disabled }
     ::= { iphelperMIB 25 }
    
    iphelperDhcpSnoopingBypassOpt82CheckStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP bypass option-82 check status. By default, it is disabled.
		 Once enabled, it will no longer enforce the check of option-82
		 field in the incoming DHCP Packets on those untrusted ports."
	    DEFVAL { disabled }
     ::= { iphelperMIB 26 }
    
    iphelperDhcpOption82FormatType OBJECT-TYPE
	    SYNTAX  INTEGER {
		macAddress(1),
		systemName(2),
		userString(3),
		interfaceAlias(4),
		autoInterfaceAlias(5),
		ascii(6)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP option-82 defines the type of information carried in circuit id 
		 and remote id sub option fields. If the type selected is string the actual
		 value of the string can be found in iphelperDhcpOption82StringValue.
		 Format type ASCII will insert the configured fields in ASCII format."
	    DEFVAL { macAddress }
     ::= { iphelperMIB 27 }

    iphelperDhcpOption82StringValue OBJECT-TYPE
	    SYNTAX	DisplayString (SIZE (0..63))
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
		"The value of the string that will be used in the circuit id and remote id
		 sub options."
     ::= { iphelperMIB 28 }

    iphelperPXESupport OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
		"When enabled the relay agent will replace the source IP address of the packet 
                 with the gateway IP address from the DHCP packet.
                 The default value is disabled."
	    DEFVAL { disabled }
     ::= { iphelperMIB 29 }

    iphelperDhcpSnoopingBindingPersistencyStatus OBJECT-TYPE
	    SYNTAX  INTEGER {
	    	enabled(1),
	    	disabled(2)
	    }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"DHCP Snooping binding table persistency check status. By default, it is disabled.
		 Once enabled, the binding entries expiry will be solely depend on Lease time"
	    DEFVAL { disabled }
     ::= { iphelperMIB 30 }

    iphelperDhcpSnoopingOption82FormatASCIIField1 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The type of the first field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
     ::= { iphelperMIB 31 }

    iphelperDhcpSnoopingOption82FormatASCIIField1StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The string value of the first field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
     ::= { iphelperMIB 32 }

    iphelperDhcpSnoopingOption82FormatASCIIField2 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType 
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The type of the second field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
     ::= { iphelperMIB 33 }

    iphelperDhcpSnoopingOption82FormatASCIIField2StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current 
            DESCRIPTION
                "The string value of the second field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
     ::= { iphelperMIB 34 }

    iphelperDhcpSnoopingOption82FormatASCIIField3 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The type of the third field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
     ::= { iphelperMIB 35 }

    iphelperDhcpSnoopingOption82FormatASCIIField3StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The string value of the third field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
     ::= { iphelperMIB 36 }


    iphelperDhcpSnoopingOption82FormatASCIIField4 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The type of the fourth field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
     ::= { iphelperMIB 37 }

    iphelperDhcpSnoopingOption82FormatASCIIField4StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The string value of the fourth field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
     ::= { iphelperMIB 38 }


    iphelperDhcpSnoopingOption82FormatASCIIField5 OBJECT-TYPE
            SYNTAX IphelpereOption82ASCIIFieldType
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The type of the fifth field in the Option 82 string in ASCII format,
                 which will be copied to Option-82 circuit id of the DHCP packet.
		 This Field is applicable only, if the option 82 format type is ASCII"
            DEFVAL { none }
     ::= { iphelperMIB 39 }

    iphelperDhcpSnoopingOption82FormatASCIIField5StringValue OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current 
            DESCRIPTION
                "The string value of the fifth field in the Option 82 string in ASCII 
                 format, which will be copied to Option-82 circuit id of the DHCP packet.
                 This Field is applicable only, if the option 82 format type is ASCII"
     ::= { iphelperMIB 40 }


    iphelperDhcpSnoopingOption82FormatASCIIDelimiter OBJECT-TYPE
            SYNTAX      DisplayString (SIZE (0..63))
            MAX-ACCESS read-write
            STATUS current 
            DESCRIPTION
                "The value of the delimiter that is inserted between the fields in the  
                 Option 82 string in ASCII format, which will be copied to Option-82 
		 circuit id of the DHCP packet. This value is applicable only, if the  
		 option 82 format type is ASCII"
     ::= { iphelperMIB 41 }

-- --------------------------------------------------------------
-- Trap Description
-- --------------------------------------------------------------
     alaDhcpClientTrapsDesc OBJECT IDENTIFIER ::= { alaDhcpClientTraps 1 }
     alaDhcpClientTrapsObj OBJECT IDENTIFIER ::= { alaDhcpClientTraps 2 }

-- Notifications

     alaDhcpClientAddressAddTrap NOTIFICATION-TYPE
     OBJECTS  {
               alaDhcpClientAddress
              }
     STATUS   current
     DESCRIPTION
                "When  new IP address is assigned to DHCP Client interface."
     ::= { alaDhcpClientTrapsDesc 0 1 }

     alaDhcpClientAddressExpiryTrap NOTIFICATION-TYPE
     OBJECTS  {
               alaDhcpClientAddress
              }
     STATUS   current
     DESCRIPTION
                "When the lease time expires or when DHCP client not 
                 able to renew/rebind an IP address."
     ::= { alaDhcpClientTrapsDesc 0 2 }

     alaDhcpClientAddressModifyTrap NOTIFICATION-TYPE
     OBJECTS  {
               alaDhcpClientAddress,
               alaDhcpClientNewAddress
              }
     STATUS   current
     DESCRIPTION
                "When the dhcp client not able to obtain the existing 
                IP address and new IP address is assigned to the DHCP client."
     ::= { alaDhcpClientTrapsDesc 0 3 }

-- Notification Objects

     alaDhcpClientAddress OBJECT-TYPE
     SYNTAX IpAddress
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the current IP address of the DHCP client."
     ::= { alaDhcpClientTrapsObj 1 }

     alaDhcpClientNewAddress OBJECT-TYPE
     SYNTAX IpAddress
     MAX-ACCESS  accessible-for-notify
     STATUS  current
     DESCRIPTION
                "This object specifies the new IP address assigned for the DHCP client."
     ::= { alaDhcpClientTrapsObj 2 }


--
-- COMPLIANCE
--


    alcatelIND1UDPRelayMIBCompliance MODULE-COMPLIANCE
    	STATUS	current
	DESCRIPTION
	    "Compliance statement for UDP Relay"
	MODULE
		MANDATORY-GROUPS
		{
		    iphelperGroup,
		    iphelperStatGroup,
		    iphelperMiscGroup,
                    alaDhcpClientTrapsGroup
		}

	    ::={ alcatelIND1UDPRelayMIBCompliances 1}


   iphelperGroup  OBJECT-GROUP
     	OBJECTS
	{
	   iphelperForwAddr,
	   iphelperStatus

	}
	STATUS current
	DESCRIPTION
	     " Collection of objects for the management of parameters of UDP Relay."
	::= {  alcatelIND1UDPRelayMIBGroups 1}


    iphelperStatGroup  OBJECT-GROUP
     	OBJECTS
	{
	    iphelperServerAddress,
	    iphelperRxFromClient,
            iphelperTxToServer,
            iphelperMaxHopsViolation,
            iphelperForwDelayViolation,
            iphelperResetAll,
	    iphelperAgentInfoViolation,
	    iphelperInvalidGatewayIP,
	    iphelperInvalidAgentInfoOptFrmSrver
	}
	STATUS current
	DESCRIPTION
	     " Collection of objects for management of statistics for UDP Relay."
	::= {  alcatelIND1UDPRelayMIBGroups 2}


     iphelperMiscGroup   OBJECT-GROUP
     	OBJECTS
	{
	      iphelperForwDelay,
	      iphelperMaxHops,
	      iphelperForwardOption,
	      iphelperBootupOption,
	      iphelperBootupPacketOption,
	      iphelperDhcpSnoopingOption82FormatASCIIField1,
	      iphelperDhcpSnoopingOption82FormatASCIIField1StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField2,
              iphelperDhcpSnoopingOption82FormatASCIIField2StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField3,
              iphelperDhcpSnoopingOption82FormatASCIIField3StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField4,
              iphelperDhcpSnoopingOption82FormatASCIIField4StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIField5,
              iphelperDhcpSnoopingOption82FormatASCIIField5StringValue,
              iphelperDhcpSnoopingOption82FormatASCIIDelimiter
 
	}
	STATUS current
	DESCRIPTION
	        " Other independent objects of UDP Relay."
	::= {  alcatelIND1UDPRelayMIBGroups 3}


        alaDhcpClientTrapsGroup NOTIFICATION-GROUP
        NOTIFICATIONS
        {
             alaDhcpClientAddressAddTrap,
             alaDhcpClientAddressExpiryTrap,
             alaDhcpClientAddressModifyTrap
        }
        STATUS current
        DESCRIPTION
               "Collection of traps for management of DHCP Client "
        ::= {  alcatelIND1UDPRelayMIBGroups 4}

   END



